NETGEAR Password Recovery and Exposure Security Vulnerability

NETGEAR is aware of the security issue that can expose web GUI login passwords while the password recovery is disabled. This vulnerability occurs when an can access the internal or when remote management is enabled on the router. Remote management is turned off by default; users can turn on remote management through advanced settings.netgear

Firmware fixes are currently available for the following affected devices. To download the firmware release that fixes the password recovery vulnerability, click the link for your model and visit the firmware release page for instructions:

NETGEAR has also released firmware that fixes the web password recovery vulnerability for the following cable modem router:

  • C6300

For cable products like the C6300, new firmware is released by your Internet service provider after NETGEAR releases it to them. The firmware fix for the C6300, firmware version 2.01.18, has been released to all service providers. Until your service provider releases the firmware fix to you, NETGEAR strongly recommends that you use the workaround procedure explained in this article. To see your C6300's current firmware version, visit the following base article and the instructions: How do I view the firmware version of my cable modem or modem router?.

NETGEAR has tested the following devices and confirmed that they are not affected by the web password recovery vulnerability:

  • V6510

For the following affected products, NETGEAR recommends using the workaround procedure explained in this article.

Router Model and Firmware Version:

  • R6200 v1.0.1.56_1.0.43
  • R6300 v1.0.2.78_1.0.58
  • VEGN2610 v1.0.0.14_1.0.12
  • AC1450 v1.0.0.34_10.0.16
  • WNR1000v3 v1.0.2.68_60.0.93
  • WNDR3700v3 v1.0.0.38_1.0.31
  • WNDR4000 v1.0.2.4_9.1.86
  • WNDR4500 v1.0.1.40_1.0.68

DSL Gateway Model and Firmware Version:

  • D6300 v1.0.0.96
  • D6300B v1.0.0.40
  • DGN2200Bv4 v1.0.0.68
  • DGN2200v4 v1.0.0.76

If your affected product does not have a firmware fix available, NETGEAR strongly recommends that you follow this workaround procedure to remediate the vulnerability:

  1. Manually enable the password recovery feature on your device.
    For more information, visit Configuring router administrative password recovery.
  2. Ensure that remote management is disabled.
    Remote management is disabled by default. For more information, check the user manual for your product, which is available from http://www.netgear.com/support/.

The potential for password exposure remains if you do not complete both steps. NETGEAR is not responsible for any consequences that could have been avoided by following the recommendations in this notification.

http://kb.netgear.com/30632/Web-GUI-Password-Recovery-and-Exposure-Security-Vulnerability

iGuRu.gr The Best Technology Site in Greecefgns

κάθε δημοσίευση, άμεσα στο inbox σας

Προστεθείτε στους 2.082 εγγεγραμμένους.

firmwareigurumanagementnetgearrecoveryvulnerability

Written by giorgos

Ο Γιώργος ακόμα αναρωτιέται τι κάνει εδώ....

Αφήστε μια απάντηση

Η ηλ. διεύθυνση σας δεν δημοσιεύεται. Τα υποχρεωτικά πεδία σημειώνονται με *

Το μήνυμα σας δεν θα δημοσιευτεί εάν:
1. Περιέχει υβριστικά, συκοφαντικά, ρατσιστικά, προσβλητικά ή ανάρμοστα σχόλια.
2. Προκαλεί βλάβη σε ανηλίκους.
3. Παρενοχλεί την ιδιωτική ζωή και τα ατομικά και κοινωνικά δικαιώματα άλλων χρηστών.
4. Διαφημίζει προϊόντα ή υπηρεσίες ή διαδικτυακούς τόπους .
5. Περιέχει προσωπικές πληροφορίες (διεύθυνση, τηλέφωνο κλπ).